 |
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Accuracy: | +/-10mm | Diameter: | M18x80 |
|---|---|---|---|
| Material: | Brass,nickel-plated Housing | Color: | Silver |
| Selling Units: | Single Item | Single Package Size : | 29X29X25 Cm |
| Single Gross Weight: | 60 G | Package Type: | Carton |
| Highlight: | Brass Ultrasonic Waterproof Sensor,200kHz Ultrasonic Type Level Sensor |
||
High Accuracy Ultrasonic Sensor Level Measurement With Pipe Stainless steel Housing
Highlights
| Technical data | ||||||||||||
| General Specifications | ||||||||||||
| Sensing distance 100…1000mm(50…800mm) | ||||||||||||
| Adjustment range 100…1000mm(50…800mm) | ||||||||||||
| Unusable area 0…100mm(0…50mm) | ||||||||||||
| Standard target plate 100mm×100mm | ||||||||||||
| Transducer frequency About 200 kHz | ||||||||||||
| Response delay About 125ms | ||||||||||||
| Indicators/Operating means | ||||||||||||
|
LED yellow solid: object in evaluation range flashing: program function |
||||||||||||
| LED red flashing: fault or program function object not detected | ||||||||||||
| Electrical specifications | ||||||||||||
| Operating voltage UB 10…30VDC,ripple10%ss | ||||||||||||
| No-load supply current ≤20mA | ||||||||||||
| Output | ||||||||||||
| Output type 1 analogue output 0…10V | ||||||||||||
| Resolution 0.11mm at max.sensing range |
|
|||||||||||
|
Deviation of the characteristic curve ±1% of full-scale value |
||||||||||||
| Repeat accuracy ±0.1% of full-scale value | ||||||||||||
| Load impedance >1k Ohm | ||||||||||||
| Temperature influence ±1.5% of full-scale value | ||||||||||||
| Ambient conditions | ||||||||||||
| Ambient temperature -25…70℃ | ||||||||||||
| Storage temperature -40…85℃ | ||||||||||||
| Mechanical specifications | ||||||||||||
| Protection grade IP67 | ||||||||||||
| Connection Connector M12x1,4-PIN |
1 BN=BROWN 2 WH=WHITE 3 BU=BLUE 4 BK=BLACK V1 Connector
|
|||||||||||
|
Material Housing brass,nickel-plated |
||||||||||||
|
Transducer epoxy resin/hollow glass sphere mixture; Polyurethane foam |
||||||||||||
|
Weight 60g
|
||||||||||||
|
Adjusting the evaluation limits The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply voltage -UB or +UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs indicate whether the sensor has recognised the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught with -UB, A2 with +UB. Two different output functions can be set: 1. Analogue value increases with rising distance to object (rising ramp) 2. Analogue value falls with rising distance to object (falling ramp) Evaluation limits may only be specified within the first 5 minutes after Power on. To modify the evaluation limits later, the user may specify the desired values only after a new Power On.
TEACH-IN rising ramp (A2 > A1) - Position object at lower evaluation limit - TEACH-IN lower limit A1 with - UB - Position object at upper evaluation limit - TEACH-IN upper limit A2 with + UB
TEACH-IN falling ramp (A1 > A2): - Position object at lower evaluation limit - TEACH-IN lower limit A2 with + UB - Position object at upper evaluation limit - TEACH-IN upper limit A1 with - UB
Default setting A1: unusable area A2: nominal sensing range Mode of operation: rising ramp
LED Displays
|
||||||||||||
Contact Person: Dream Chan
Tel: 86-755-83747109
